HX40M: Extend HDMI 230ft with CAT5e/CAT6

Written by Blaine Semple on . Posted in

HX40M: Extend HDMI 230ft with CAT5e

hx40m_both
The HX40M HDMI Extender Kit 1.3 (Deep Color up to 12 bits) over CAT5, extends HDMI signal over CAT5e/CAT6, up to 70 meters (230 ft) at 1080i/720p and 40 meters (132 ft) at 1080p.

  • Extend HDMI signal over one CAT5e/6 cable
  • HDMI™ and HDCP compliant
  • Transmission range up to 230 ft by 1080i/720p
  • Transmission range up to 132 ft by 1080p@60Hz@24bit
  • Built in auto equalization for easy plug and play
  • Transmitter unit has built in EDID auto backup function

NOTE: HDMI signals have very high bandwidth requirements. We urge customers to use CAT6 or better UTP cable to ensure the very best quality installation.

HX70M: Extend HDMI 230ft with CAT5e/6/6a/7

Written by Blaine Semple on . Posted in

HX70M: Extend HDMI 230ft with CAT5e/6/6a/7

hx70m_both
The HX70M, HDMI™ (HDBaseT) CAT5 Extender, uses only one cost effective CAT5e/6 cable to extend your HDTV display up to 230ft (70 meters) at 1080p/60Hz/48 bit and 4K x 2K (30Hz). The HX70M includes IR function to allow flexibility in configuring home and commercial entertainment systems.

  • Uses only one CAT5e/6/6a/7 cable
  • HDMI™ and HDCP compliant
  • 3D ready and 4K*2K capable
  • Built in IR control
  • Uses HDBaseT™ Technology
  • Uncompressed HD video up to 1080p/60Hz/48bits
  • Maximum data rate 10.2 Gbps
  • Audio transmission supports Dolby TrueHD, DTS-HD MA
  • No adjustment required

HX1K-3: extend HDMI 328ft with CAT5e/6/6a/7

Written by Blaine Semple on . Posted in

HX1K-3: extend HDMI 328ft with CAT5e/6/6a/7

hx1k-3_both
The HX1K-3 is part of the CE labs® HDMI UTP Extender Series. Using HDBaseT technology, extend HDMI™ signals up to 328 ft (CAT5e/6/6a/7) at 4K x 2K and 1080p/60Hz/48 bit.
  • Uses only one CAT5e/6/6a/7 cable
  • HDMI™ and HDCP compliant
  • 3D ready
  • Extend signal up to 328 ft (CAT5e/6/6a/7) at 4K x 2K and 1080p/60Hz/48 bit
  • Uses HDBaseT™ Technology
  • Uncompressed high definition video up to 1080p/60Hz/48bits
  • Maximum data rate 3.4 Gbps
  • Audio transmission full pass-through
  • No adjustment required

CAT5RX: CAT5 Component HD Receiver

Written by Blaine Semple on . Posted in

CAT5RX: CAT5 Component HD Receiver

cat5_receiver
The CAT5 Component HD Receiver supports one monitor with component video, right and left audio, and digital audio. The RX has an adjustable equalizer to correct for the signal loss caused by long cables. An optional external IR system can be used with IR jacks.






  • Cable length equalizer for long distances
  • Video continuity LEDs to ensure all signals are transmitting
  • IR port

C5-HDP2: UTP Passive Balun with Pig Tails

Written by Blaine Semple on . Posted in

C5-HDP2: UTP Passive Balun with Pig Tails

c5-hdp2_side
The C5-HDP2 CAT5 Distribution UTP Balun Transformer, distributes a high definition video/digital audio source to a remote location over extended distances, using an economical CAT5 cable.






  • Uses standard CAT5 or CAT6 cable
  • Can be used with four composite video channels and mono analog audio
  • Four RCA connectors for component video and digital SPDIF audio
  • Includes 3.5mm to RCA audio cable
  • Heavy gauge steel, powder-coated chassis, is corrosion and scratch resistant
0 0items

Your shopping cart is empty.

Items/Products added to Cart will show here.