(Refurbished) HSC20: Component to HDMI Scaler

Written by Blaine Semple on . Posted in

Refurbished HSC20: Component to HDMI Scaler

hsc20
The HSC20 Component to HDMI™ scaler, converts HD component video (Y-Pb-Pr) and Left and Right Audio signals to an HDMI™ output. This permits any source with any range of component video to be viewed on any HDMI™ display.






  • Can be displayed on any HDMI Display.
  • Compliant with HDMI™ 1.2
  • HDCP Compliant
  • Supports full range of Component Video Resolutions: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p

(Refurbished) HSC16: VGA to HDMI Scaler

Written by Blaine Semple on . Posted in

Refurbished HSC16: VGA to HDMI Scaler

hsc16
The HSC16 is a VGA to HDMI™ format converter that converts a PC VGA and Audio to HDMI™, with the benefit of connecting the PC to a 1080P HDTV. The converter will support multiple resolutions up to 1920×1080 @ 60Hz.






Compatible VGA Resolutions:
  • 1920 x 1080 @ 60Hz
  • 1600 x 1200 @ 60Hz
  • 1360 x 768 @ 60Hz
  • 1280 x 1024 @ 60Hz
  • 1024 x 768 @ 60Hz
  • 1280 x 720 @ 60Hz
  • 1280 x 768 @ 60Hz
  • 800 x 600 @ 60Hz
  • 640 x 480 @ 60Hz
  • 720 x 400 @ 85Hz

(Refurbished) HSC12: HDMI to Composite Scaler

Written by Blaine Semple on . Posted in

Refurbished HSC12: HDMI to Composite Scaler

hsc12





  • HDMI to Composite Scaler
  • HDMI™ 1.3 compliant
  • Converts signal on HDMI formats 480p, 576p (50Hz) , 720p, 1080i,1080p to NTSC 480i (Analog Signal)
  • HDCP 1.1 compliant receiver
  • 1 HDMI™ input, 1 RCA jack output connector for video, 2 RCA output connectors for left/right audio and 1 S-Video output jack
  • Audio output impedance: 1K ohm
  • Audio output impedance: 1K ohm
  • Power requirement: 5 volts DC, 1A with 2.1mm Power Jack
  • (Refurbished) C5-HDP2: UTP Passive Balun with Pig Tails

    Written by Blaine Semple on . Posted in

    Refurbished C5-HDP2: UTP Passive Balun with Pig Tails

    c5-hdp2_side
    The C5-HDP2 CAT5 Distribution UTP Balun Transformer, distributes a high definition video/digital audio source to a remote location over extended distances, using an economical CAT5 cable.






    • Uses standard CAT5 or CAT6 cable
    • Can be used with four composite video channels and mono analog audio
    • Four RCA connectors for component video and digital SPDIF audio
    • Includes 3.5mm to RCA audio cable
    • Heavy gauge steel, powder-coated chassis, is corrosion and scratch resistant

    (Refurbished) AV501HD: 1×5 Component A/V Amplifier

    Written by Blaine Semple on . Posted in

    Refurbished AV501HD: 1×5 Component A/V Amplifier

    av501hd_front
    The AV501HD 1×5 Component A/V amplifier, compatible with all HDTV component video signals, distributes one high definition source to five different locations without any signal loss. The amplifier also supports composite video and digital audio.






  • True One-to-One Signal Radio
  • Distributes loss-less Video/Audio Source to multiple locations
  • Designed for large display arrays
  • Heavy duty metal housing; commercial duty rated
  • (Refurbished) HM41SR-3: 4 x 1 HDMI Selector

    Written by Blaine Semple on . Posted in

    Refurbished HM41SR: HDMI Switcher

    hm41sr
    The HM41SR is a four-input, one-output HDMI Selector, with remote. HDTV resolution up to 1080p and PC resolution up to 1600×1200 60Hz.
    • 4 in 1 out switching
    • Compliant with HDMI/HDCP requirements
    • Remote control
    • Automatic source detection
    • RS-232 control support
    • Rugged metal housing

    (Refurbished) VG5EK: Twisted Pair VGA UTP Extender Kit

    Written by Blaine Semple on . Posted in

    Refurbished VG5EK: Twisted Pair Extender Kit

    vg5ek_angle
    The VG5EK Twisted Pair VGA UTP Extender Kit, extends VGA signal up to 180 meters to remote monitors. Offering adjustable equalization length and adjustable VGA signal gain.
    • Adjustable equalization length
    • Adjustable VGA signal gain
    • Rugged metal chassis
    • Extend VGA signals more than 575′
    • Easy installation with Cat5/Cat6

    (Refurbished) CAT5TX: CAT5 UTP Extender HD Transmitter

    Written by Blaine Semple on . Posted in

    Refurbished CAT5TX: CAT5 HD Transmitter

    cat5_transmitter
    The CAT5TX HD CAT5 UTP Extender transmitter has one set of RCA inputs and one set of RCA loop-thru connectors to go to the next Transmitter if installed. The unit allows any Audio/Video source, with Y, Cb, Cr, or Y, Pb, Pr outputs (component), to distribute Audio and Video to distant locations with excellent picture quality. The amplifier also supports digital audio. 6 output HD Component + Audio CAT5 Distribution Hub, distributes a high definition component or composite video and digital, or left and right audio, over extended distances, using a CAT5/6 cable.
    • Active amplification ensures high quality transmission
    • Loop output for use of additional CAT5 transmitters
    • Six CAT5 outputs for additional locations
    • Discrete passive IR channel for the use of external IR remote control systems

    (Refurbished) HSC11: HDMI to Composite Scaler

    Written by Blaine Semple on . Posted in

    Refurbished HSC11: HDMI to Composite Scaler

    hsc11





  • HDMI to Composite Scaler
  • HDMI™ 1.2a compliant
  • Converts signal from HDMI formats (digital) to NTSC (analog)
  • HDCP 1.1 compliant receiver
  • 1 HDMI™ input, 1 RCA jack output connector for video, and 2 RCA output connectors for left/right audio
  • Audio output impedance: 1K ohm
  • Power requirement: 5 volts DC, 1A with 2.1mm Power Jack
  • (Refurbished) AV700: 1×7 Composite A/V Amplifier

    Written by Blaine Semple on . Posted in

    Refurbished AV700: 1×7 Composite A/V Amplifier

    av700_front
    The AV700 1×7 Composite A/V amplifier, distributes audio/video to seven TVs without loss. The AV700 can be looped, cascaded or put in tandem as shown below without loss of audio/video signals. Audio/Video cables need to be of top quality and can have runs of up to 100 feet between units, and 150 feet between units and TVs.






  • Daisy chains several units for larger displays with great picture quality
  • Heavy duty metal housing provides excellent shielding
  • Allows up to 150 ft. runs
  • Save the expense of additional A/V receivers
  • (Refurbished) AV400: 1×4 Composite A/V Amplifier

    Written by Blaine Semple on . Posted in

    Refurbished AV400: 1×4 Composite A/V Amplifier

    av400_front
    The AV400 1×4 Composite A/V amplifier, distributes audio/video to four TVs without loss. The AV400 can be looped, cascaded or put in tandem without loss of audio/video signals. Audio/Video cables need to be of top quality and can have runs of up to 100 feet between units, and 150 feet between units and TVs.






  • Daisy chains several units for larger displays with great picture quality
  • Heavy duty metal housing provides excellent shielding
  • Allows up to 150 ft. runs
  • Save the expense of additional A/V receivers
  • (Refurbished) AV901HD: 1×9 Component A/V Amplifier

    Written by Blaine Semple on . Posted in

    Refurbished AV901HD: 1×9 Component A/V Amplifier

    av901hd_front
    The AV901HD 1×9 Component A/V amplifier, compatible with all HDTV component video signals, allows any audio/video source to distribute audio and video to nine different locations without signal loss. This unit can be looped, cascaded, or put in tandem, without loss of audio/video signals to multiple TVs.






  • Compatible with all HDTV component video signals
  • Daisy chain several units for larger displays
  • Allows up to 150 ft. runs
  • Save the expense of additional A/V receivers
  • 0 0items

    Your shopping cart is empty.

    Items/Products added to Cart will show here.