DVPS44: 4×4 HDMI Matrix TV Wall Processor

Written by Blaine Semple on . Posted in

DVPS44: 4×4 HDMI Matrix TV Wall Processor

dvps44_front
The DVPS44 4×4 HDMI Matrix TV Wall Processor, provides the most flexible and cost effective solution in the market to route high definition video sources, plus multi-channel (up to 7.1-channel) digital audio, from any of the four HDMI sources to remote displays, at the same time.






  • Allows any HDMI display to view any HDMI source at any time
  • Supports 7.1 channel digital audio
  • Supports default HDMI EDID and learns the EDID of displays
  • The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote control, RS-232 control and Ethernet control
  • Easy installation with rack-mounting & wall-mounting designs for master and receiver respectively
  • Fast response time for channel switch
  • Four user-selectable HDMI outputs from 640×480 to 1920×1200
  • Supports HDMI/DVI input, from 640×480 to 1920×1080@60, interlaced or progressive
  • Resize, position, zoom, rotation, fade-in, fade-out output video
  • Each HDMI output has an independent controllable display area
  • HDMI and HDCP compliant
  • Image parameters and layouts are automatically saved in flash memory of the device and can be recalled for later use
  • Several Image parameters and layouts can be saved in computers and can be loaded for later use
  • Software control through RS-232 and Ethernet
  • Firmware upgradable for support of new features and technology enhancements
  • HM41SR: HDMI Switcher

    Written by Blaine Semple on . Posted in

    HM41SR: HDMI Switcher

    hm41sr
    The HM41SR is a four-input, one-output HDMI switcher, with remote. HDTV resolution up to 1080p and PC resolution up to 1600×1200 60Hz.






    • 4 in 1 out switching
    • Compliant with HDMI/HDCP requirements
    • Remote control
    • Automatic source detection
    • RS-232 control support
    • Rugged metal housing

    HS103: HDMI Switcher

    Written by Blaine Semple on . Posted in

    HS103: HDMI Switcher

    hs103
    The HS103 is a three-input, one-output HDMI switcher. It allows switching of three Smart function (auto switching) HDMI inputs to the output. You can also use the selection button on the front panel to choose the input you want to select. The HS103 has equalization and amplification, to ensure HDMI signals transmission through long cable without quality loss.






    • 3 in 1 out Auto Switch
    • HDCP compliant
    • Works with XBOX 360, PS3, Blu-ray Players and Apple TV
    • Automatically switches to active source
    • No AC adapter needed
    • Manual source selection switch

    HSW44C+: 4×4 HDMI Matrix Switcher

    Written by Blaine Semple on . Posted in

    HSW44C+: 4×4 HDMI Matrix Switcher

    hsw44c+
    The HSW44C+ 4×4 HDMI & full 3D support over CAT5 Matrix, with IR Pass-through, provides the most flexible and cost effective solution in the market to route high definition video sources + multi-channel (up to 7.1-channel) digital audio, from any of the four HDMI sources to the remote displays, at the same time. Through low cost Cat-5/5e/6 LAN cables, not only can high quality video and audio be transmitted to the display sites, but users can also switch among four HDMI sources using the push-in button, Ethernet or remote control. With single power design at the source site, each remote module is easily installed without power supply. The built-in IR extension function allows users at display site access the DVD player, PS3 or any HDMI supported devices, directly.






    • HDMI™ (Deep Color)
    • HDCP compliant
    • Allows any source to be displayed on multiple displays at once
    • Supports 7.1 channel digital audio
    • Matrix master can switch every output channel to any HDMI™input by push button, IR remote control, or RS-232 control
    • Extends video signal up to 165 feet over CAT5e at 720p and 1080i; and 115 feet at 1080p
    • Allows control of main matrix center through control line at remote receiver
    • Allows control of local HDMI™ sources such as DVD and TiVo® by IR extender through control path at remote receiver
    • Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively
    • Supports default HDMI EDID and learns the EDID of displays
    0 0items

    Your shopping cart is empty.

    Items/Products added to Cart will show here.