UH8-4K: 1×8 Ultra HD HDMI Amplifier

Written by Blaine Semple on . Posted in

UH8-4K: 1×8 Ultra HD HDMI Splitter

uh8-4k_front
The UH8-4K 1×8 Ultra High Definition HDMI amplifier, supports video resolutions up to 4K x 2K @60Hz, 8-bit, 4K x 2K @30Hz, 10-bit or 1080p @60Hz, 12-bit. Delivering one ultra high definition source to multiple displays.

  • Supports video resolutions up to 4Kx2K @60Hz, 8-bit, 4Kx2K @30Hz, 10-bit, 1080p @60Hz, 12-bit
  • 3D ready
  • HDMI and HDCP Compliant
  • Supports conversion of HDMI signaling to DVI signaling
  • Wide frequency range: 25MHz – 340MHz
  • Cascadable for very large display wall systems
  • Heavy duty metal housing. Commercial duty rated
  • Integrated EDID in non-volatile memory and DDC support for the HDMI ports using 256-byte SRAM
  • Consumer Electronics Control (CEC) interfaces with HDMI-compliant CEC I/O
  • Supports Standard Audio, DSD Audio & HD (HBR) Audio
  • Locking power connector
  • LED Indicators: Input, Output, HDCP, Power
  • Integrated Cable retention bracket (CE labs® patented)

HA8-4K: 1×8 Ultra High Definition HDMI Amplifier

Written by Blaine Semple on . Posted in

HA8-4K: 1×8 Ultra High Definition HDMI Amplifier

ha8-4k_front
The HA8-4K 1×8 Ultra High Definition HDMI amplifier, supports video resolutions up to 4K x 2K @ 60Hz, 4:2:0 pixel, 1080p @ 60Hz, 12-bit or 720p/1080i @ 120Hz, 12-bit. Delivering one ultra high definition source to multiple displays.






  • Silicon Image® IC’s for maximum performance and compatibility
  • Compliant with HDMI/HDCP/DVI requirements
  • Supports video resolutions up to 4K x 2K @ 60Hz, 4:2:0 pixel, 1080p @ 60Hz, 12-bit or 720p/1080i @ 120Hz, 12-bit
  • AVI, Audio InfoFrame, and video input resolution detection for all input ports, accessible port-by-port
  • Hardware-based HDCP error detection and recovery minimizes firmware intervention
  • Automatic output mute and unmute based on link stability, such as cable connect/detach
  • Integrated EDID in non-volatile memory and DDC support for the HDMI ports using 256-byte SRAM for HDMI ports
  • Consumer Electronics Control (CEC) interfaces with HDMI-compliant CEC I/O
  • Supports PCM and compressed audio formats up to 192 kHz (Dolby Digital, DTS, and AC-3)
  • Supports all the mandatory and optional 3D formats up to 300 MHz
  • Repeater function supports up to 127 devices
  • Cascadable for retail video wall displays
  • Integrated Cable retention bracket (CE labs® patented)
  • HA4-4K: 1×4 Ultra High Definition HDMI Amplifier

    Written by Blaine Semple on . Posted in

    HA4-4K: 1×4 Ultra High Definition HDMI Amplifier

    ha4-4k_front
    The HA4-4K 1×4 Ultra High Definition HDMI amplifier, supports video resolutions up to 4K x 2K @ 60Hz, 4:2:0 pixel, 1080p @ 60Hz, 12-bit or 720p/1080i @ 120Hz, 12-bit. Delivering one ultra high definition source to multiple displays.






  • Silicon Image® IC’s for maximum performance and compatibility
  • Compliant with HDMI/HDCP/DVI requirements
  • Supports video resolutions up to 4K x 2K @60 Hz, 4:2:0 pixel, 1080p @60Hz, 12-bit or 720p/1080i @120Hz, 12-bit
  • AVI, Audio InfoFrame, and video input resolution detection for all input ports, accessible port-by-port
  • Hardware-based HDCP error detection and recovery minimizes firmware intervention
  • Automatic output mute and unmute based on link stability, such as cable connect/detach
  • Integrated EDID in non-volatile memory and DDC support for the HDMI ports using 256-byte SRAM for HDMI ports
  • Consumer Electronics Control (CEC) interfaces with HDMI-compliant CEC I/O
  • Supports PCM and compressed audio formats up to 192 kHz (Dolby Digital, DTS, and AC-3)
  • Supports all the mandatory and optional 3D formats up to 300 MHz
  • Repeater function supports up to 127 devices
  • Cascadable for retail video wall displays
  • Integrated Cable retention bracket (CE labs® patented)
  • HA82-3R: 2×8 Dual HDMI Amplifier equipped with RS-232 Control

    Written by Blaine Semple on . Posted in

    HA82-3R: 2×8 Dual HDMI Amplifier equipped with RS-232 Control

    ha82-3_front
    The HA82-3R is a 2 in 8 out Dual HDMI (Deep Color) distribution amplifier, equipped with RS-232 control, that distributes two high definition sources to multiple displays.
    • Dual HDMI inputs selectable from control port
    • Enhanced amplified signals for longer cable runs
    • Integrated HCRS (HDMI Cable Retention System). Prevents accidental disconnects and service calls
    • Compliant with HDMI/HDCP requirements
    • 3D over HDMI
    • PanelLink digital technology
    • Supported resolutions: 480i, 480p, 720p, 1080i, 1080p
    • Cascadable for very large display wall systems
    • Heavy duty metal housing. Commercial duty rated
    • Equipped with RS-232 Control Port

    HA82-3G: 2×8 Dual HDMI Amplifier equipped with GPIO Control

    Written by Blaine Semple on . Posted in

    HA82-3G: 2×8 Dual HDMI Amplifier equipped with GPIO Control

    ha82-3_front
    The HA82-3G is a 2 in 8 out Dual HDMI (Deep Color) distribution amplifier, equipped with GPIO control, that distributes two high definition sources to multiple displays.
    • Dual HDMI inputs selectable from control port
    • Enhanced amplified signals for longer cable runs
    • Integrated HCRS (HDMI Cable Retention System). Prevents accidental disconnects and service calls
    • Compliant with HDMI/HDCP requirements
    • 3D over HDMI
    • PanelLink digital technology
    • Supported resolutions: 480i, 480p, 720p, 1080i, 1080p
    • Cascadable for very large display wall systems
    • Heavy duty metal housing. Commercial duty rated
    • Equipped with GPIO Control Port

    VG81DA: 1×8 VGA Distribution Amplifier

    Written by Blaine Semple on . Posted in

    VG81DA: 1×8 VGA Distribution Amplifier

    vg81da_front
    The VG81DA 1×8 VGA distribution amplifier (video splitter), sends one VGA source to multiple locations. Extend signal up to (64 meter) 213 feet.






  • 400 MHz pixel frequency
  • Easy installation
  • Can be cascaded
  • Supports DDC, DDC2, DDC2B (for video part 1)
  • Output is compatible with standard VGA card
  • 1U rack design
  • VG41DA: 1×4 VGA Distribution Amplifier

    Written by Blaine Semple on . Posted in

    VG41DA: 1×4 VGA Distribution Amplifier

    vg41da_front
    The VG41DA 1×4 VGA distribution amplifier (video splitter), sends one VGA source to multiple locations. Extend signal up to (64 meter) 213 feet.






  • 400 MHz pixel frequency
  • Easy installation
  • Can be cascaded
  • Supports DDC, DDC2, DDC2B (for video part 1)
  • Output is compatible with standard VGA card
  • 1U rack design
  • AV700: 1×7 Composite A/V Amplifier

    Written by Blaine Semple on . Posted in

    AV700: 1×7 Composite A/V Amplifier

    av700_front
    The AV700 1×7 Composite A/V amplifier, distributes audio/video to seven TVs without loss. The AV700 can be looped, cascaded or put in tandem as shown below without loss of audio/video signals. Audio/Video cables need to be of top quality and can have runs of up to 100 feet between units, and 150 feet between units and TVs.






  • Daisy chains several units for larger displays with great picture quality
  • Heavy duty metal housing provides excellent shielding
  • Allows up to 150 ft. runs
  • Save the expense of additional A/V receivers
  • AV400: 1×4 Composite A/V Amplifier

    Written by Blaine Semple on . Posted in

    AV400: 1×4 Composite A/V Amplifier

    av400_front
    The AV400 1×4 Composite A/V amplifier, distributes audio/video to four TVs without loss. The AV400 can be looped, cascaded or put in tandem without loss of audio/video signals. Audio/Video cables need to be of top quality and can have runs of up to 100 feet between units, and 150 feet between units and TVs.






  • Daisy chains several units for larger displays with great picture quality
  • Heavy duty metal housing provides excellent shielding
  • Allows up to 150 ft. runs
  • Save the expense of additional A/V receivers
  • AV901HD: 1×9 Component A/V Amplifier

    Written by Blaine Semple on . Posted in

    AV901HD: 1×9 Component A/V Amplifier

    av901hd_front
    The AV901HD 1×9 Component A/V amplifier, compatible with all HDTV component video signals, allows any audio/video source to distribute audio and video to nine different locations without signal loss. This unit can be looped, cascaded, or put in tandem, without loss of audio/video signals to multiple TVs.






  • Compatible with all HDTV component video signals
  • Daisy chain several units for larger displays
  • Allows up to 150 ft. runs
  • Save the expense of additional A/V receivers

  • Have a promo code? Enter it at checkout!

    AV901COMP: 1×8 Component A/V Amplifier

    Written by Blaine Semple on . Posted in

    AV901COMP: 1×8 Component A/V Amplifier

    av901compp_front
    The AV901COMP 1×8 Component A/V amplifier, compatible with all HDTV component video signals, allows any audio/video source to distribute audio and video to eight different locations without signal loss.






  • Compatible with all HDTV component video signals
  • Daisy chain several units for larger displays
  • Allows up to 150 ft. runs
  • Save the expense of additional A/V receivers
  • DCB101: 5 Channel DC Isolation Unit

    Written by Blaine Semple on . Posted in

    DCB101: 5 Channel DC Isolation Unit

    dcb101_front
    The DCB101 5 Channel DC Isolation Unit, eliminates DC offsets, in the video or audio, that can cause hum bar interference.






  • Eliminates annoying hum bars
  • Compatible with HD distribution amplifiers
  • Easy to use HDTV module
  • Up to three video channels may be used for three individuals composite video signals, if desired
  • 0 0items

    Your shopping cart is empty.

    Items/Products added to Cart will show here.